View BAP27-01_1217041.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
M3D319
BAP27-01 Silicon PIN diode
Preliminary specification 2001 Nov 01
Philips Semiconductors
Preliminary specification
Silicon PIN diode
FEATURES * High speed switching for RF signals * Low diode capacitance * Low diode forward resistance * Very low series inductance * For applications up to 4 GHz. APPLICATIONS * RF attenuators and switches. DESCRIPTION Planar PIN diode in a SOD723A ultra small plastic SMD package. PINNING PIN 1 2
BAP27-01
DESCRIPTION cathode anode
handbook, halfpage
Marking code: M1
Fig.1 Simplified outline (SOD723A) and symbol.
;
1 2 Top view
MAM405
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VR IF Ptot Tstg Tj PARAMETER continuous reverse voltage continuous forward current total power dissipation storage temperature junction temperature Ts = 90 C CONDITIONS - - - -65 -65 MIN. MAX. 50 100 315 +150 +150 UNIT V mA mW C C
2001 Nov 01
2
Philips Semiconductors
Preliminary specification
Silicon PIN diode
ELECTRICAL CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL VF IR Cd PARAMETER forward voltage reverse current diode capacitance IF = 50 mA VR = 20 V VR = 0; f = 1 MHz VR = 1 V; f = 1 MHz VR = 20 V; f = 1 MHz rD diode forward resistance IF = 0.5 mA; f = 100 MHz; note 1 IF = 1 mA; f = 100 MHz; note 1 IF = 5 mA; f = 100 MHz; note 1 IF = 10 mA; f = 100 MHz; note 1 |s21 |2 isolation VR = 0; f = 900 MHz VR = 0; f = 1800 MHz VR = 0; f = 2450 MHz |s21 |2 insertion loss IF = 0.5 mA; f = 900 MHz IF = 0.5 mA; f = 1800 MHz IF = 0.5 mA; f = 2450 MHz |s21 |2 insertion loss IF = 1 mA; f = 900 MHz IF = 1 mA; f = 1800 MHz IF = 1 mA; f = 2450 MHz |s21 |2 insertion loss IF = 10 mA; f = 900 MHz IF = 10 mA; f = 1800 MHz IF = 10 mA; f = 2450 MHz |s21 |2 insertion loss IF = 100 mA; f = 900 MHz IF = 100 mA; f = 1800 MHz IF = 100 mA; f = 2450 MHz L charge carrier life time when switched from IF = 10 mA to IR = 6 mA; RL = 100 ; measured at IR = 3 mA CONDITIONS - 0.45 0.35 0.27 1.6 1.2 0.7 0.6 12.3 7.7 6.0 0.17 0.19 0.21 0.13 0.15 0.18 0.08 0.11 0.14 0.06 0.10 0.12 0.17 TYP. 0.95
BAP27-01
MAX. 1.1 20 - 0.45 0.32 2.5 2.0 1.2 0.95 - - - - - - - - - - - - - - - -
UNIT V nA pF pF pF dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB s
LS Note
series inductance
0.6
-
nH
1. Guaranteed on AQL basis: inspection level S4, AQL 1.0.
THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to soldering point VALUE 190 UNIT K/W
2001 Nov 01
3
Philips Semiconductors
Preliminary specification
Silicon PIN diode
GRAPHICAL DATA
BAP27-01
10 rD ()
500 Cd (pF) 400
300
1
200
100
0.1 0.1
f = 100 MHz; T j = 25 C.
0
1 10 100 IF (mA)
0
4
8
12
16 VR (V)
20
f = 1 MHz; T j = 25 C.
Fig.2
Forward resistance as a function of forward current; typical values.
Fig.3
Diode capacitance as a function of reverse voltage; typical values.
0 |s21|2 (dB) -0.1
(3) (4)
0 |s21|2 (dB) -10
-0.2
(1) (2)
-20 -0.3 -30
-0.4
-0.5 0
(1) I F = 0.5 mA. (2) I F = 1 mA.
-40 1
(3) I F = 10 mA. (4) I F = 100 mA. Diode zero biased and inserted in series with a 50 stripline circuit. T amb = 25 C.
2 f (GHz)
3
0
1
2 f (GHz)
3
Diode inserted in series with a 50 stripline circuit and biased via the analyzer Tee network. T amb = 25 C.
Fig.4
Insertion loss (|s21|2) of the diode as a function of frequency; typical values.
Fig.5
Isolation (|s21|2) of the diode as a function of frequency; typical values.
2001 Nov 01
4
Philips Semiconductors
Preliminary specification
Silicon PIN diode
PACKAGE OUTLINE
BAP27-01
SOD723A
Fig.6
R DE UN
T EN PM LO VE DE
2001 Nov 01
5
Philips Semiconductors
Preliminary specification
Silicon PIN diode
DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS
BAP27-01
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Preliminary data
Qualification
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2001 Nov 01
6
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
SCA73
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
125004/00/02/pp7
Date of release: 2001
Nov 01
Document order number:
9397 750 08972

▲Up To Search▲

Price & Availability of BAP27-01

	To Download BAP27-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .